Enviro C-10124 User Manual
5
Assembly Instructions
Your ENVIRO BISTRO will require some assembly. Please do not use a drill to modify any component, it is not
necessary. Inspect all components for damage before assembly begins. If damage is present, please contact
your local dealer or a courier company. Replace the damaged components with original manufacturer’s parts, no
substitutions will be permitted. Do not commence construction if components are damaged or missing.
The Cart assembly and Main Engine have been pre-assembled for convenience and ease of assembly.
T
OOLS
R
EQUIRED
:
● 1⁄4” socket or nut driver
●
5
/
32
” Allen key (supplied)
●
7
/
16
” wrench or adjustable wrench
●
11
/
16
” wrench or adjustable wrench
● 3⁄4” wrench or adjustable wrench ● Hammer or mallet
C
ART
C
OMPONENTS
:
● Pre-assembled cart
● (2) Plated caster assemblies
● Aluminum axle and (2) end caps
● (2) Stainless steel axle mount
● (2) BBQ wheels
● (2) Shelf gussets
● Side shelf
● Side shelf top
● (30) 1⁄4” x 1⁄2” stainless steel bolts
● (30) 1⁄4” stainless steel lock washers ● (20) 1⁄4” stainless steel nuts
●
5
/
32
” Allen key
Once the cart assembly has been removed from the
packaging, open the doors and remove all the objects
from inside of the cart. The cart will look similar to
Figure 4.
There should be a small box, a large box, the aluminum
axle and some packaging materials.
The components shown in Figure
5 should be found in the larger
box.
Most of the stainless steel
components are covered with
plastic to prevent scratching the
unit during assembly. This can be
removed
Figure 5
Figure 4