Weber 3400 NG User Manual
REINSTALL THE
CONTROL PANEL
CONTROL PANEL
Set the control panel in place over both frame braces.
(Hold the Crossover Ignition button up while setting the
control panel in place.) Slip washers on Phillips screws,
insert into holes as shown, and tighten. Figure 27 (a).
(Hold the Crossover Ignition button up while setting the
control panel in place.) Slip washers on Phillips screws,
insert into holes as shown, and tighten. Figure 27 (a).
Push on the burner control knobs. Figure 27 (b).
Figure 27
(a)
(b)
REFER TO OPERATING
GUIDE BEFORE LIGHTING
BARBECUE
GUIDE BEFORE LIGHTING
BARBECUE
Underside view
of right work
surface or side
burner
of right work
surface or side
burner