Standard Horizon CP500 User Manual
CP500
Page 85
18.0 GPS WAAS SMART RECEIVER SPECIFICATIONS
This GPS WAAS Smart Receiver is based on a ultimate GPS engine that delivers accuracy
better than three meters by decoding the GPS correction signals from the satellite-based
WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the
passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
better than three meters by decoding the GPS correction signals from the satellite-based
WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the
passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color
Ivory white
Dimensions
97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
Weight (without cable)
0,35 lb (160 g)
Cable
white 15 meter 8x28AWG cable with 6 pins female connector
Electrical Characteristics
Input Voltage
10 Vdc to 35 Vdc unregulated
Input Current
0.8 Wmax
GPS Receiver Sensitivity
-143 dBm (typical)
GPS Performance
Receiver
WAAS (North America), EGNOS (Europe), MSAS (Asia)
Geodetic Datum
WGS84
Channels
16
Frequency
1575.42MHz (L1, C/A code)
Acquisition Time
Reacquisition
< 1 second
Hot Start
< 3.5 seconds
Warm Start
< 33 seconds
Cold Start
< 40 seconds
Accuracy
GPS
< 2.5m
DGPS
< 2.0m
NMEA Output
Messages
GGA, RMC, GSA, GSV, TXT