Fisher 00275-8026-0001 User Manual
2-4
DEVICE SETUP MENU
As shown in Figure 2-2, the Device Setup menu contains the following five
options:
options:
Press
to access the Device Setup menu from the Online menu. The
options on this menu (Figure 2-2) are described in the following paragraphs.
FIGURE 2-2. Device Setup Menu.
Process Variables
Press
to access the Process Variables menu.
This menu lists all process variables and their values. These process
variables are continuously updated.
variables are continuously updated.
Diag/Service
Press
to access the Diag/Service menu.
This menu offers device and loop tests as well as calibration options. Figure
2-3 illustrates a typical menu.
2-3 illustrates a typical menu.
FIGURE 2-3. Diagnostics and Service Menu.
Test device initiates a diagnostic routine at the device and can report an
electronics failure, as well as other failures that can affect performance.
electronics failure, as well as other failures that can affect performance.
1
STU
1
STU
2
VWX