Raymarine DS400 & DS500 User Manual
Chapter 6: Sounder Setup
67
1
METERS settings only available in CE models
ALARMS...
This menu group is used to set up alarms that are available to alert you of
certain conditions. Each alarm can be toggled ON and OFF and you set the
threshold at which the alarms are triggered, except for the fish and battery
voltage alarms.
certain conditions. Each alarm can be toggled ON and OFF and you set the
threshold at which the alarms are triggered, except for the fish and battery
voltage alarms.
Alarms consist of an audible tone and moving arrows pointing to the data
display for that particular item. When an alarm is activated, press a key to
mute the tone. The visual indicator continues as long as the condition exists.
display for that particular item. When an alarm is activated, press a key to
mute the tone. The visual indicator continues as long as the condition exists.
Figure 6-2:
Alarm Condition
You may want to use the shallow and deep water alarms when you are
anchored. Set the limits to just above and below your anchor depth; the
sounder triggers an alarm if the anchor drags and the boats moves into
shallower or deeper water.
anchored. Set the limits to just above and below your anchor depth; the
sounder triggers an alarm if the anchor drags and the boats moves into
shallower or deeper water.
Depth Offset
—
–9.9 to +9.9 FEET,
–1.7 to +1.7 FATHOMS,
–3.0 to +3.0 METERS
–1.7 to +1.7 FATHOMS,
–3.0 to +3.0 METERS
1
0
Speed Calibrate
—
1% to 200% in 1% incre-
ments
ments
100%
Temp Calibrate
—
–5.0 to +5.0°C
–9.0 to +9.0°F
–9.0 to +9.0°F
0°
Sounder Simulator
—
OFF,
ON
ON
OFF when transducer
connected
ON when transducer not
connected
Menu
Sub-Menu
Options
Default
40
60
60
ft
DEPTH ALARM
Indicator (scrolling)
Indicator (scrolling)
D6681-1