Furuno FSV-35 User Manual

2.  WIRING

Connect a IV-1.25 sq ground wire (local supply) between the ground terminal on the 
control unit and the ship’s ground.

Connect the optional remote controller (FSV-854) as shown below.

1. Unfasten the six panhead screws at the bottom of the control unit to detach the 

cover.

2. Cut a cross in the grommet on the cover then pass the remote controller cable 

through the grommet. 

Panhead screw
M4x25, 6 pcs.

Rear side of the control unit (cover removed)

Control unit cable
(10S2884)

Grommet

Remote controller 
cable

Rear side of the control unit (cover removed)