ICOM MR-1000RTM User Manual

Page of 47
10
4
BASIC OPERATION
The following are typical basic operation examples, which may hinder radar reception (sea clutter, precipitation in-
terference and echoes from other radar).
■ RAIN function
This function eliminates reflection echoes from rain,
snow, fog etc. 
• Rotate the control fully counterclockwise to deactivate the
control function. The RAIN indicator (
) disappears.
• NOTE: DO NOT reduce the reflection echoes too much,
otherwise you may miss weaker targets. 
■ SEA function
This function serves to eliminate echoes from waves
at close range. Reduce the receiver gain for close ob-
jects within a radius of 8 miles to eliminate sea clutter.
• Rotate the control fully clockwise to activate the automatic
control function. SEA indicator (
)appears in the upper left
of the screen.
■ OFF CENTER function
The scanning area can be shifted in a desired direc-
tion and can be enlarged partially. This is useful when
the Head-up* is selected and you want to enlarge the
bow direction display, or, the center of the screen shifts
in the direction of the intersection. 
• This function is available for 24NM or shorter range selec-
tion.
*This function is not available in the TM screen.
q Push [Ù Ú Ω ≈] to move the cursor where you
want to shift the center of the screen.
• Max. offsetting is up to 75% of the screen.
w Push [ALM]/[
] and [MODE]/[
] simulta-
neously to shift the screen.
e Push [ALM]/[
] and [MODE]/[
] simulta-
neously again to return to the normal screen.
With OFF CENTER ON
Normal screen
Adjust SEA control
Echos from sea waves
Adjust RAIN control
Small echos
WARNING:
The [SEA]/[
] control re-
duces the receiver sensitivity of objects within 8
miles. Therefore, caution and careful adjustment are
necessary when using the [SEA]/[
] control. 
Small objects may not be displayed on the screen
when strong echoes from the rain or the island within
1 NM while automatic SEA function is activating.
MR-1000R2_T2.qxd  04.2.24 10:22  Page 10