ICOM MR-1000RTM User Manual

PANEL DESCRIPTION

#5 COMPASS INDICATOR (pgs. 24, 39)

• GYRO

: NMEA (gyro) is connected.

• COMPASS

: NMEA (compass), N+1 or AUX data is

connected.

#6 EBL1/ 2 READOUTS (pgs. 15–16)

Shows the bearing of the displayed Electronic Bear-
ing Lines (EBL1 and EBL2) when the EBL is in use.
• EBL2 shows PI (

!0) readout.

#7WAYPOINT/MOB READOUTS (p. 13)

➥Shows the bearing and distance to the waypoint

received from navigation equipment.

• This readout appears when the “WPT” of the FUNC-

TION menu is turned ON.

• To display the waypoint/MOB marker, bearing data

and NMEA data with 0183 format is necessary.
(p. 39)

➥Shows the bearing and distance to the MOB

(Man Over Board) event marker.

• Push [MOB]/[

] to cancel the readout and the

symbol.

#8 POSITION/CURSOR READOUT (p. 13)

Shows your own ship or cursor latitude and longi-
tude readout when external NMEA data with 0183
format is connected.

• Select ‘SHIP’ or ‘CURS’ in the “POSN DISP” of the

FUNCTION menu.

• To display the POSITION; NMEA 0183 is necessary.
• To display the CURSOR; NMEA 0183 and bearing data

are necessary.

#9 CURSOR INDICATOR

Shows the bearing and distance to the cursor.

$0 VECTOR INDICATOR (p. 18)

Shows the ATA and OWN vector type.

• T: True vector
• R: Relative vector

$1 VECTOR TIME INDICATOR (p. 18)

Shows the vector interval time. Select vector time
in the “TRAIL TIME” of the VIDEO menu.

• 30 min. is applied, when ‘

∞’ is selected for the vector

time.

$2 TRAILS INDICATOR (p. 12)

Shows the trail time.

• Echo remains with gradation during the trail time period

on the screen. (Except for the trail time;

∞)

• Progressing time counter starts to count the time until

the timer reaches the trail time.

$3 HEADING INDICATOR

Shows the heading bearing readout.

• The HDG readout indicates the bow of the ship’s bearing

in a clockwise direction from north.

$4 IR INDICATOR (p. 11)

Eliminates or reduces interference caused by other
radar operating nearby.

• This function is available when the “IR” in the VIDEO

menu is set to 1 or 2.

$5 ECHO STRETCH INDICATOR (p. 6)

Appears when the echo stretch function is in use.

• This function is available when the “STRETCH” of the

VIDEO menu is turned ON.

$6 CROSS LINE CURSOR

Used for measuring the bearing and distance, set-
ting the alarm zone, selecting the ATA targets, etc.

• Push [Ù Ú Ω ≈] several times to move the cursor.

$7 EBL2 (pgs. 15–16)

Used for bearing measurement. When a target is
selected, the EBL readout (

#6) shows the bearing.

$8 OWN SHIP VECTOR INDICATOR

Shows the vector of your own ship.

$9 VRM 1 (pgs. 15–16)

%0 VRM 2 (pgs. 15–16)

Used for distance measurement. When a target is
selected, the VRM1/2 readout (

%3) shows the dis-

tance.

%1 NORTH MARK

The north mark shows the true north direction.

%2 EBL1 (pgs. 15–16)

Used for bearing measurement. When a target is
selected, the EBL readout (

#6) shows the bearing.

%3 VRM1/2 READOUTS (pgs. 15–16)

Shows the distance of the displayed Variable Range
Markers (VRM1 and VRM2) when the VRM is in
use.

• Nautical miles (NM) and kilometers (KM) can be se-

lected in the FUNCTION menu as the distance unit.

%4 ALARM INDICATOR (p. 17)

Appears when the alarm function is in use.

%5 ZOOM INDICATOR (p. 11)

Appears when the zoom function is in use.

• Push [TARGET]/[

] and [TRAILS]/[

] simul-

taneously to turn the function ON or OFF.

%6 TIME INDICATOR

%7 TIME INDICATOR

Shows the estimated time to the marker edge from
center of the marker with current speed.

%8 TIME INDICATOR

Shows the estimated time to the waypoint with cur-
rent speed.

MR-1000R2_T2.qxd 04.2.24 10:22 Page 5