Sony PCS-1P User Manual

Page of 78
COMMUNICATION SYSTEM
PCS-1
PCS-1P
SYSTEM INTEGRATION MANUAL
1st Edition (Version 2.2 and later)

Summary of Contents of user manual for Sony PCS-1P

  • Page 1: CoverCOMMUNICATION SYSTEM PCS-1 PCS-1P SYSTEM INTEGRATION MANUAL 1st Edition (Version 2.2 and later)
  • Page 2! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or...
  • Page 3: Table of Contents Table of Contents 1. Installation 1-1. Caution on Installation ................................................................................ 1-1 1-1-1. Lay Out the Videoconferencing Room ...................................... 1-1...
  • Page 4 4. Technical Data 4-1. PCS-1/1P Port Number Used ...................................................................... 4-1 4-1-1. During P-P Connection (Default) ............................................... 4-1 4-1-2. P-P...
  • Page 5: 1. Installation Section 1 Installation 1-1. Caution on Installation 1-1-1. Lay Out the Videoconferencing Room Arrange it in consideration of the...
  • Page 6Highly directional range of microphone The ideal directional range of a microphone is shown below. The numeric value is a...
  • Page 7The microphone built in the PCS-C1/C1P Camera Unit is Notes on installation of the microphones assumed to be used to...
  • Page 8Installation of document stand a. Adjust the direction of an infrared light emitter. Install so that the infrared light emitter...
  • Page 9b. Installation range (Reference) If an image is disturbed in the range shown below, bring it near PCS-1/1P with the...
  • Page 101-1-2. Operating Environment Layout Considerations . Avoid having large, moving objects, especially people, behind the participants, as the quality of...
  • Page 111-2. Flowchart of Installation Place used <Refer to “1-1. Caution on Installation” on page 1-1.> Unpacking Check of supplied accessories...
  • Page 121-3. System Connections This section describes the typical system connections. m . Be sure to turn off all the equipment...
  • Page 131-3-2. When Used in ISDN n Do not connect/disconnect the camera cable or the interface cable with the power on....
  • Page 141-4. Initialization 1-4-1. Inserting Batteries into the Remote Commander Most of the operations with the Video Communication System can be...
  • Page 151-4-2. Turning On/Off the TV Monitor Together With the Communication Terminal If you use a Sony TV, insert the IR...
  • Page 161-4-3. Adjust the Volume of a Monitor 1-4-4. Installing the Communication Television Terminal and Camera Adjust the television side after...
  • Page 171-4-5. Turning On m . After the power is turned on, the camera moves 1. Turn on the TV monitor....
  • Page 181-4-6. When the power is first turned on 3. Set a monitor that outputs a signal. after installation n Notice...
  • Page 194. Press the ↑, ↓, ←, and → buttons of a remote n controller and click the “Next” button. Press...
  • Page 2011. Set the following items on LAN. 13. Press the ↑, ↓, ←, and → buttons of a remote controller...
  • Page 211-5. System Setting The contents of a setting menu are shown in the table below. Change the setting as required....
  • Page 22 Item Contents of setting Initial value General Setup Page Terminal Name Enter the terminal name to be notified to...
  • Page 23 Item Contents of setting Initial value LAN Setup Page DHCP Mode Set whether to use DHCP (Dynamic Host Configuration...
  • Page 24 Item Contents of setting Initial value Administrator Page Administrator Set the password for an administrator. The administrator can operate...
  • Page 25 Item Contents of setting Initial value Machine Page Host Version Displays the software version of the main unit. Information...
  • Page 261-6. Flowchart of Opening Test Opening test NO Communicate using ISDN? YES ISDN dialing <Refer to “1-6-1. Dialing Procedure of...
  • Page 271-6-1. Dialing Procedure of ISDN n It is required that the line number used in the other end is entered...
  • Page 28Item Operation Screen Remarks (Confirmation item) 6. The remote party makes a response. The ON LINE indicator (blue) lights. Picture...
  • Page 291-6-2. Answering Procedure of ISDN n It is required that the line number used in this unit is entered in...
  • Page 301-6-3. Dialing Procedure of LAN Item Operation Screen Remarks (Confirmation item) 1. Select “Dial” from the launcher menu using ↑,...
  • Page 31 Item Operation Screen Remarks (Confirmation item) 6. The remote party makes a response. The ON LINE indicator (blue) lights. Picture...
  • Page 321-6-4. Answering Procedure of LAN Item Operation Screen Remarks (Confirmation item) 1. Calling from the remote party A ringer tone...
  • Page 33: 2. Maintenance Section 2 Maintenance 2-1. Confirmation Procedure of Local 4. Select the number of lines used. Terminal Operation Using Self-Loop...
  • Page 342-2. LAN Communication Test using 4. Select the IP column using the ↑, ↓, ←, and → buttons Ping of...
  • Page 352-3. Locating the Components Inspect the items below when this unit does not operate normally. 1. This unit does not...
  • Page 366. A line is not connected. (LAN) . Check that the LAN cable is connected properly. . Check that the...
  • Page 372-4. Operation Log PCS1/1P has a function that outputs the internal processing history, between the connection and disconnection of a...
  • Page 38(1) Click “Start menu”, “Accessories”, “Communications”, and then “HyperTerminal”. (2) Enter “VT100” in “Name”, select any icon, and click the...
  • Page 39(3) Select “COM1” in “Connect using” and click the “OK” button. (4) Set the baud rate as described below and...
  • Page 40(5) Click “Capture Text” from a “Transfer” menu. (6) Set the saving place and name of a log file and...
  • Page 41(7) After logging, click “Stop” from “Capture Text” in a “Transfer” menu. (8) Double-click the extracted log file to view...
  • Page 42Operation log using commercial PC (2) When PCS-1/1P is connected to LAN, a log can be extracted from PCS-1/1P using...
  • Page 43(2) Enter ping, and then enter the IP address of PCS-1/1P after spacing out. Press the [Enter] key and confirm...
  • Page 44(4) Enter “LAN” in “Name:”, select any icon, and click the “OK” button. (5) Select “TCP/IP (Winsock)” in “Connect using”,...
  • Page 45(6) Click “Capture Text” from a “Transfer” menu. (7) Set the saving place and name of a log file and...
  • Page 46(8) The message below is displayed on the hyper terminal screen. PCS-1 Telnet Server login: Enter sonypcs and press the...
  • Page 472-5. Updating of Software The software of the main unit may be updated for improvement in a function. Two methods...
  • Page 482-6. Service Mode For saving of a phone book, loading of a phone book, saving of application, saving of a...
  • Page 49For loading of application Contents of functions 1. Display a service menu. 2. Insert the Memory Stick, in which the...
  • Page 502) Save Phone Book 9) Load Setup All contents of a phone book are recorded and saved in The setup...
  • Page 51: 3. Compatibility in LAN Network Section 3 Compatibility in LAN Network 3-1. Connection via Hub LAN1 LAN2 HUB Teleconference Teleconference terminal A terminal B...
  • Page 52 Fixed IP for PPPoE: OFF Fixed IP Address for PPPoE: Blank PPPoE DNS: Obtain automatically Primary DNS: Cannot be...
  • Page 533-2. Connection via Router Example of system LAN1 LAN2 192.100.10.1 VPN 192.100.20.1 Router Router Teleconference Teleconference terminal A terminal B...
  • Page 54 PPPoE DNS: Obtain automatically Primary DNS: Cannot be set. Secondary DNS: Cannot be set. 2. Confirm that the IP...
  • Page 553-3. Connection via DHCP Example of system LAN1 LAN2 Router Router Teleconference DHCP DHCP Teleconference terminal A server A server...
  • Page 56 PPPoE DNS: Obtain automatically Primary DNS: Cannot be set. Secondary DNS: Cannot be set. 2. Confirm that the IP...
  • Page 573-4. Connection via Gatekeeper Example of system LAN1 LAN2 192.100.10.1 192.100.20.1 Router Router Teleconference terminal A Gatekeeper Teleconference terminal B...
  • Page 582. Confirm that the IP address displayed in the launcher menu of teleconference terminal B is 192.100.20.20. 3. Confirm that...
  • Page 593-5. Connection via DHCP and Gatekeeper Example of system Router Router LAN1 LAN2 Teleconference terminal A DHCP Gatekeeper DHCP Teleconference...
  • Page 602. Confirm that the IP address is displayed in the launcher menu of teleconference terminal B. (Example: IP:192.100.20.20) 3. Confirm...
  • Page 613-6. Connection beyond NAT Example of system 192.168.10.1 210.10.10.1 210.20.20.1 Router Internet Router Teleconference Teleconference terminal A terminal B 192.168.10.10...
  • Page 62 Fixed IP Address for PPPoE: Blank PPPoE DNS: Obtain automatically Primary DNS: Cannot be set. Secondary DNS: Cannot be...
  • Page 633-7. Connection using PPPoE Example of system Internet Teleconference Teleconference terminal A ONU Regional IP ONU terminal A Ethernet FTTH...
  • Page 64 Primary DNS: Cannot be set. Secondary DNS: Cannot be set. 2. Confirm that the IP address displayed in the...
  • Page 65: 4. Technical Data Section 4 Technical Data 4-1. PCS-1/1P Port Number Used 4-1-1. During P-P Connection (Default) PCS-1/1P uses the port number...
  • Page 664-1-3. During Use of Internal MCU Function (Default) PCS-1/1P that operates as internal MCU uses the port number below when...
  • Page 674-2. Setting of PCS-1/1P and HUB The initial setting of the PCS-1/1P is Auto. In the Auto setting of the...
  • Page 68 4-4. Audio Selection List of PCS-1/1P 4-4 Audio setup menu Audio input Audio output CTE Input MIC Echo Selection...
  • Page 69 Audio setup menu Audio input Audio output PCS-1/1P CTE Input MIC Echo Selection Internal MIC mute AUDIO AUDIO OUT...
  • Page 704-5. Remote Motion Picture Display during Multipoint Connection of PCS-1/1P 4-5-1. Remote Motion Picture Displayed at Each Point in Audio...
  • Page 714-5-3. Remote Motion Picture at Each Point in Split Mode The images in all connected terminals are split and simultaneously...
  • Page 72 The transition examples of an image when the previous image displayed in the lower-right position is one in a...
  • Page 734-6. Display Transition List of PCS-1/1P General setup Dual monitor: Off Monitor output: VIDEO OUT In this case, connect a...
  • Page 74General setup Dual monitor: On Monitor output: RGB OUT In this case, connect a video monitor to the VIDEO OUT...
  • Page 754-7. Priority Level List of Video and Audio Codec High-speed bit rate of H.323 (512 K or higher) 1 2...
  • Page 76Middle-speed bit rate of H.320 (256 K to 511 K) 1 2 3 4 5 6 7 Sound quality V...
  • Page 77
  • Page 78PCS-1 (UC) Sony Corporation 2004. 7 22 PCS-1P (CE) E PSNC BCC B2B Solutions Div. ©2003
downloadlike
ArtboardArtboardArtboard
Report Bug