Sony PCS-1P User Manual

2-2

PCS-1/1P

A LAN communication test can be performed using ping

(ICMP).

1.

The launcher menu below is displayed when the power

switch of a communication terminal is turned on.

2.

Select a dial using the 

↑

, 

↓

, 

←

, and 

→

 buttons of a

remote controller and press the ENTER button or the
CONNECT/DISCONNECT ( / ) button of a remote

controller.
The dial menu is displayed.

3.

Select “Line Type” using the 

↑

, 

↓

, 

←

, and 

→

 buttons

of a remote controller and press the ENTER button.
Then, select “LAN” using the 

↑

 and 

↓ 

buttons and

press the ENTER button.

4.

Select the IP column using the 

↑

, 

↓

, 

←

, and 

→

 buttons

of a remote controller and press the ENTER button.

Enter “PING. remote IP address” in the IP column.
For example, enter PING.192.168.0.1 when

performing a connection test to the device whose IP
address is 192.168.0.1.

Alphabets and numeric characters are switched using
the “Kana/Alphabet/Numeric” button of a remote

controller.

5.

Select “Dial” using the 

↑

, 

↓

, 

←

, and 

→

 buttons of a

remote controller and press the ENTER button or the

CONNECT/DISCONNECT ( / ) button of a remote
controller.

6.

The screen during LAN outgoing is displayed.
The message below is displayed in yellow below the

“Dialing (LAN)” dialog box when the communication
using ping succeeds.

1 reply from 192.168.0.1
The numeric character at the beginning is counted up

sequentially.  When it reaches 4, message window
“Line cannot be connected completely.  No reason:

Redial again” is displayed at the bottom of the screen.
When the communication using ping cannot be

performed, no yellow characters is displayed and the
message window described above is displayed.