Sony PCS-1P User Manual
3-7
PCS-1/1P
192.100.10.1
192.100.20.1
Teleconference terminal A
192.100.10.10
User name:
192.100.10.10
User name:
PCS1A
User number: 100
Teleconference terminal B
192.100.20.20
User name:
192.100.20.20
User name:
PCS1B
User number: 200
Gatekeeper
192.100.10.20
Router
Router
LAN1
LAN2
3-4. Connection via Gatekeeper
Example of system
When a call is initiated from teleconference terminal A to teleconference terminal B.
1.
The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode:
OFF
Host Name:
Enter any name.
IP Address:
Local IP address (192.100.20.20)
Network Mask:
Depends on a network. Usually, set to 255.255.255.0.
Gateway Address:
192.100.20.1
DNS Address:
Blank
Gatekeeper Mode:
ON
Gatekeeper Address:
192.100.10.20
User Alias:
Enter any name. (Example: PCS1B)
User Number:
Enter any number. (Example: 200)
SNMP Mode:
OFF
Trap Destination:
Blank
Community:
public
Description:
Videoconference Device
Location:
Blank
Contact:
Blank
NAT Mode:
OFF
NAT Address:
Blank
Packet Resend Request: Blank
Adaptive Rate Control: OFF (Set to ON when a packet loss occurs frequently.)
Adaptive Rate Control: OFF (Set to ON when a packet loss occurs frequently.)
LAN Mode:
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to “4-2. PCS-1/1P and Hub setting”.)
Port Number Used:
Default (Set to “Custom” when a port number is specified by the network
administrator.)
administrator.)
TCP Port Number:
2253 (Enter the port number specified by the network administrator when
the port number used is set to “Custom”.)
the port number used is set to “Custom”.)
UDP Port Number:
49152 (Enter the port number specified by the network administrator when
the port number used is set to “Custom”.)
the port number used is set to “Custom”.)
TOS:
OFF
PPPoE:
OFF
PPPoE User Name:
Blank
PPPoE Password:
Blank
Fixed IP for PPPoE:
OFF
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Obtain automatically
Primary DNS:
Cannot be set.
Secondary DNS:
Cannot be set.