Sony PCS-1P User Manual
3-12
PCS-1/1P
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
PPPoE DNS:
Obtain automatically
Primary DNS:
Cannot be set.
Secondary DNS:
Cannot be set.
2.
Confirm that the IP address displayed in the launcher menu of teleconference terminal B is
210.20.20.2.
210.20.20.2.
3.
The LAN setup menu of teleconference terminal A is set as described below.
DHCP Mode:
DHCP Mode:
Off (Set to “Auto” when a router has a DHCP server function. Setting is not
required from “IP address” to “DNS address” when “Auto” is set.
Host Name:
Enter any name.
IP Address:
Local IP address (192.168.10.10)
Network Mask:
255.255.255.0.
Gateway Address:
192.168.10.1
DNS Address:
Blank
Gatekeeper Mode:
OFF
Gatekeeper Address:
Blank
User Alias:
Blank
User Number:
Blank
SNMP Mode:
OFF
Trap Destination:
Blank
Community:
public
Description:
Videoconference Device
Location:
Blank
Contact:
Blank
NAT Mode:
ON
NAT Address:
210.10.10.1
Packet Resend Request: ON
Adaptive Rate Control: ON
Adaptive Rate Control: ON
LAN Mode:
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to “4-2. PCS-1/1P and Hub setting”.)
Port Number Used:
Default (Set to “Custom” when a port number is specified by the network
administrator.)
administrator.)
TCP Port Number:
2253 (Enter the port number specified by the network administrator when
the port number used is set to “Custom”.)
the port number used is set to “Custom”.)
UDP Port Number:
49152 (Enter the port number specified by the network administrator when
the port number used is set to “Custom”.)
the port number used is set to “Custom”.)
TOS:
OFF
PPPoE:
OFF
PPPoE User Name:
Blank
PPPoE Password:
Blank
Fixed IP for PPPoE:
OFF
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Obtain automatically
Primary DNS:
Cannot be set.
Secondary DNS:
Cannot be set.
4.
Confirm that the IP address displayed in the launcher menu of teleconference terminal A is
192.168.10.10.
5.
Enter LAN in the phone book of teleconference terminal A for a line I/F, IP address 210.20.20.2 of
teleconference terminal B in it for an IP address, and other required items. After that, register
teleconference terminal B in the phone book and initiate a call. Or set LAN for a line I/F and IP
teleconference terminal B in the phone book and initiate a call. Or set LAN for a line I/F and IP
address 210.20.20.2 of teleconference terminal B for an IP address by Dial, and then initiate a call.