Honeywell E-EQ-MX3PLUSOGWW User Manual
Reboot
When the Windows desktop is displayed or an application begins, the power up (or reboot) sequence is complete.
Warm Boot
Start > Run
The Warm Boot function refreshes the Windows operating system without clearing RAM or deleting installed programs. User-
set parameters are unchanged.
set parameters are unchanged.
Tap Start > Run and type WARMBOOT.EXE or WARMBOOT. This command is not case sensitive. Tap the OK button. This
process takes less than 15 seconds. Temporary data not saved is lost.
process takes less than 15 seconds. Temporary data not saved is lost.
Note:
There may be slight delays while the wireless client connects to the network, re-authorization for voice-enabled
applications completes, Wavelink Avalanche management of the MX3Plus startup completes, or Bluetooth
relationships establish or re-establish.
relationships establish or re-establish.
Cold Boot
Start > Run
The Cold Boot function reboots the device, erases all registry data, and user-specified settings. The factory default settings are
restored when the MX3Plus powers on again.
restored when the MX3Plus powers on again.
Passwords are lost upon cold boot. If a password is set, that password must be entered to begin the cold boot power cycle
process.
process.
Tap Start > Run and type COLDBOOT.EXE or COLDBOOT. This command
is not case-sensitive
1
. Tap the OK button.
Note:
Because of the extreme nature of cold boot, Honeywell recommends using this command only as an emergency (or
when instructed to do so as part of a specific MX3Plus procedure).
1
The text typed in the text box can be upper or lower case or a combination of upper and lower case letters.
2-15