ICOM FP-561 User Manual
7
4
AVAILABLE OPERATION MODES AND SCREENS
4-2 Menu operation
Menu screens allows you to select and execute various functions of the sys-
tem or to change various settings.
For available menu screens and the menu structure, see page 9.
The following summarizes the menu operation flow.
q
Press the [MENU] key.
The Main Menu screen will appear.
The currently selected menu item (a submenu) is highlighted in yellow.
w
Select the desired submenu (e.g., Plotter Menu) using the [UP] or [DOWN] key
and press the [SET] key.
The selected submenu (e.g., Plotter Menu) screen will appear.
On the submenu screen, the currently selected menu item (setting item) is high-
lighted in yellow.
e
Select the desired setting item using the [UP] or [DOWN] key and press the
[SET] key.
The selected setting item turns blue and the corresponding setting field is high-
lighted in yellow.
* While any setting item is highlighted in blue, you cannot move to other submenu
screens.
r
Select the desired setting option in the setting field using the [LEFT] or [RIGHT]
key and press the [SET] key.
Alternatively, select the desired digit using the [LEFT] or [RIGHT] key and enter
or change the value using the [UP] or [DOWN] key; then press the [SET] key.
t
Repeat step
r
above for each setting item.
y
Repeat steps
e
to
t
above for each submenu.
u
When you finish setting, press the [CLR] momentarily to close the Main Menu
screen.
For detailed description of setting on each submenu screen, see the appropriate
section.
M A I N M E N U
POSITIONING MENU
PLOTTER MENU
ALARM MENU
SOUNDER MENU
PLOTTER MENU
TRK ERASE
ROUTE ENTER/EDIT→
MARK ENTER/ERASE→
G P S 4 8 ° 2 1 . 4 1 7 N 1 2 5 ° 2 6 . 6 4 3 W
¡
Main Menu screen
¡
Plotter Menu screen
Press to select a submenu.
Press to open the submenu.
Press to return to the previous
screen.
screen.
Use to select a setting option or digit.
Use to change the value of the digit.
Press to confirm and save the setting.
Press to clear or cancel the setting and return to
the item selection step.
When pressing this key during the item selection
step, you will returns to the previous screen.
the item selection step.
When pressing this key during the item selection
step, you will returns to the previous screen.
SCREEN SETTING
TRK COLOR
WHIT OFF
HEADING ON
OFF
FRONT WIDE ON
OFF
OVER ZOOM ON
OFF
TRK STEP 30S
1.00
NM
G P S 4 8 ° 2 1 . 4 1 7 N 1 2 5 ° 2 6 . 6 4 3 W
CLR
ENT
SET
CANC
SEL
CLR
ENT
SET
CANC
SEL
CLR
SET
SET
CANC
ADJ
SEL
43.4
FT
43.4
FT
CLR
SET
SET
CANC
ADJ
SEL
20
40
60
80
0
100
20
40
60
80
0
100