Tyan Computer B5382 User Manual

To replace the SAS/SATA backplane, you need to remove all 
the fans and the fan cradle first. Refer to the first three steps 
given in “2.5 Installing the Floppy Disk Drive (Option)”. Then, 
do the following:

1. Remove all the SAS/SATA hot-swap HDD trays 

corresponding to the SAS/SATA backplane to be 
replaced from the FT48-B5382.

2. Disconnect all cables from the SATA/SAS backplane to 

be replaced.

3. Remove the screw holding the SATA/SAS backplane.

4. Lift the backplane from the chassis.

5. Place a new backplane in position and secure in place 

with one screw. Then reconnect the power and data 
cables.