Furuno 1834C-BB User Manual

 

7.  Pass the antenna cable with connector through the cable gland, gasket and cable 

entrance of the antenna unit, and then tighten cable gland. 

 
 Note 

1: Be sure the shrink tube on the antenna cable does not contact the gasket. 

2: Pinch the gasket tightly and insert it into the cable entrance. Confirm that the slit 

in the gasket is completely closed after inserting it into the cable entrance. 

Rubber gasket

Gasket

Cable Gland

Sectional view

Mounting base

Rubber gasket

Antenna cable

Gasket

Close the gasket 
tightly.

Shrink tube

Do not allow 
shrink tube to 
contact gasket.

8.  Twist antenna connector cables at the position between the shrink tube and the cable tie, 

and then attach EMI core (supplied) to cables as shown below. After attachment, shift 
EMI core slightly to confirm that it does not pinch cables. 

Cable tie

Shrink tube

Attach EMI core.

Gasket

Mounting base

Twist cables here.