Furuno 1834C-BB User Manual

 

Referring to the outline drawing at the back of this manual, drill five holes in the mounting 
platform: four holes of 15 mm diameter for fixing the antenna unit and one hole of 25-30 mm 
diameter for the signal cable. 
 
Fastening the radiator to the radiator bracket 

For your reference, the antenna installation materials list appears in the packing list for this 
unit at the back of this manual. 
 
1.  Remove the radiator cap from the radiator bracket. 
2.  Coat contacting surface between the antenna radiator and the radiator bracket with 

silicone sealant as shown in the figure below. 

Coat grey area with
silicone sealant.

Groove

Radiator

RADIATOR BRACKET

(top view)

Coat hatched area with
silicone sealant.

10mm

(MODEL 1934C-BB)

(MODEL 1944C-BB/1954C-BB/1964C-BB)

ANTENNA RADIATOR

(bottom view)

3.  Coat threaded holes on the antenna radiator with silicone sealant. 
4.  Grease the O-ring and set it to the radiator bracket. 
5.  Lay the antenna radiator on the radiator bracket. 
6.  Coat the radiator fixing bolts (4 pcs.) with silicone sealant. Fasten the antenna radiator to 

the radiator bracket with the radiator fixing bolts, flat washers and spring washers. 

Flat washer

Spring washer

Hex head bolt
(M8 x 30)

Radiator bracket

Coat bolts with
silicone sealant.

Antenna
radiator

O-ring

Coat threaded
holes with silicone
sealant.