DCS 221712 User Manual

Page of 48
INSTALLATION
12
2.
Snap the central baffle filter panel into the place so the both rails engage with side pins on both
sides of hood. Drive 2 screws (1 on each side ) through baffle filter panel hole to hood. See 
Fig. 12.
3.
Snap four-side baffle trim to hood (4 pins engage each side trim). The baffle trims are supplied 
separately (for IVS52 only). See Fig. 13.
4.
Install all baffle filters as per Use and Care Manual instructions.
Fixing screw location
Fig. 12
Fig. 13
Baffle filter panel
Baffle trim