3D Innovations NC60 User Manual

Downloading Fonts and Macros

3-6

❖

DocuPrint NC60 System Administrator Guide

Download Fonts

The following is a sequence of commands that can be sent
to the DocuPrint NC60 to download a font to the disk.

In this example:

• <ESC>%-12345X is the PJL UEL command which starts

this sequence.

• @PJL<CR><LF> is the mandatory PJL command

following the UEL command.

• @PJL FSDOWNLOAD... downloads a font named

“font1” that is “XX” bytes in size.

• <ESC>%-12345X is the UEL command which ends this

sequence.

Invoking this font requires the following PCL sequence:

Notes:

1. The case of the string ID must be the same as the case

of the fontname in the FSDOWNLOAD command.

2. The byte count (“6” in the above example) must equal

the string ID byte count plus 1.

<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\fonts\font1” SIZE=XX<CR><LF>
<binary data><ESC>%-12345X

Sets the current font ID to the given
string ID “font1”

Associates the current font ID with the
string ID “font1”

Selects the font referred to as “font1”
for the primary font