Delfield STD4472N-S Leaflet
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior top is one-piece, 22-gauge stainless steel with
integral square nosing on the front.
integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge galvanized
steel.
steel.
Exterior ends are stainless steel.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/2 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coil are located
on the interior rear wall of the cabinet. Refrigerant flow is
controlled by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
is 1/2 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coil are located
on the interior rear wall of the cabinet. Refrigerant flow is
controlled by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control. ACT electronic, solid state control, mounted on
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 2” (5.08cm) diameter front
locking plate casters. 2.5” (6.35cm) ride height.
locking plate casters. 2.5” (6.35cm) ride height.
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers have a 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers.
Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm)
and three 1/9 size 4"-6" deep pans. Bottom drawer holds one
12" x 20" and three 1/9 size 4" deep pans. Pans are supplied
by others.
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers.
Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm)
and three 1/9 size 4"-6" deep pans. Bottom drawer holds one
12" x 20" and three 1/9 size 4" deep pans. Pans are supplied
by others.
Specifications
Standard Features
Options &
Accessories
Accessories
All 4400 and 4500 Series units are 100% front breathing,
which allows the unit to be pushed against a wall or built into
a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Heavy duty self-closing hinges
“ST” prefix models have a 4” stainless steel backsplash
“D” prefix models feature Delfield’s exclusive new drawer
system. Drawers are backed by a 10-year warranty on the
track assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
which allows the unit to be pushed against a wall or built into
a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Heavy duty self-closing hinges
“ST” prefix models have a 4” stainless steel backsplash
“D” prefix models feature Delfield’s exclusive new drawer
system. Drawers are backed by a 10-year warranty on the
track assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ST4472N
Three section flat top refrigerator with doors
STD4472N
Three section flat top refrigerator with drawers
•
•
•
Models
ST4472N Flat Top
Front-Breathing Self-Contained Compact Flat Top Refrigerators
ST
44
72
N
Fla
t T
op
Fro
nt-
Bre
ath
in
g S
elf
-C
on
ta
in
ed
C
om
pa
ct
Fla
t T
op
R
efr
ig
era
to
rs
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Interior lights
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Interior lights
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
alter electrical specifications
of the unit.
of the unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ST4472N