Panasonic PT-LB78VE User Manual
Projecting an image
E
NGLISH - 25
Basic Operation
Projecting an image
Confirm the connections of the peripheral devices (
page 21). Switch on the
power (
Selecting the input signal
1 ) Switch on the connected devices.
When playing a connected DVD player, if
SIGNAL
SEARCH in the DISPLAY OPTION menu is set
to
ON, the input signal is detected and projected
automatically when the projector is switched on.
Set the
z
INPUT GUIDE under the ON-SCREEN
DISPLAY in the DISPLAY OPTION menu to
DETAILED. If the projector cannot detect any
input signal, the Computer connection guidance
will display. (
2 ) Select an input signal.
The image selected with the
INPUT SELECT
Note
Change the setting of the
z
PICTURE menu
according to the connected device and DVD, video
Confirm the aspect ratio of the screen and image.
z
Select the optimum aspect ratio. (
Positioning the image
When setting up the projector for the first time or setting up at a new place, you must perform the following operations.
1 ) Adjust the vertical angle of the projector.
Place the projector at the right angle from the screen.
z
Press the adjuster buttons and adjust the vertical projection angle. Then, adjust the projected image to the
z
centre of the screen.
2 ) Adjust the projection size and focus.
z
page 14) and turn the zoom and focus rings to adjust the projected
image. After adjusting, be sure to install the Zoom-Focus ring cover to protect from dust.
Zoom ring
(ZOOM)
Focus ring
Focus ring
(FOCUS)
Remarks
When you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again.
z
If keystone distortion occurs, see “KEYSTONE”.
z