Smeg FR238A7 User Manual

Page of 11
20
ELECTRICAL CONNECTION
For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 
13amp fused plug, to change a fuse in this type of plug use an 
A.S.T.A. approved fuse to BS 1362 type and proceed as 
follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and if 
the fuse cover is lost the plug must not be used until a 
correct replacement is fitted.
Correct replacement are identified by the colour insert or 
the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local 
electrical store.
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, please 
contact Whirlpool Service on 0870 600 8989 for further 
instruction. Please do not attempt to change plug yourself. 
This procedure needs to be carried out by a qualified 
Whirlpool technician in compliance with the manufactures 
instructions and current standard safety regulations.
For the Republic of Ireland only
The information given in respect of Great Britain will 
frequently apply, but a third type of plug and socket is also 
used, the 
2-pin, side earth type. In this case, the wire which is 
coloured GREEN AND YELLOW must be connected to the 
EARTH contact, and the two wires to the two pins, 
irrespective of colour. The supply to the socket must be 
fitted with a 16 amp fuse.
63633043GB.fm  Page 20  Saturday, March 5, 2005  3:25 PM