True Manufacturing Company TMC-34-SS User Manual

To insure that your unit works properly from the 
first day, it must be installed properly.  We highly 
recommend a trained refrigeration mechanic and 
electrician install your 

True equipment.   The cost 

of a professional installation is money well spent.

Before you start to install your 

True unit, carefully 

inspect it for freight damage. If damage is discov-
ered, immediately file a claim with the delivery 
freight carrier.  

 Adjustable 

Wrench

  Phillips Head Screwdriver

 Level

The following procedure is recommended for 
uncrating the unit:

A.  Remove the outer packaging, (cardboard and 

bubbles or styrofoam corners and clear plastic). 
Inspect for concealed damage. Again, immedi-
ately file a claim with the freight carrier if there 
is damage. 

B.  Move your unit as close to the final location as 

possible before removing the wooden skid.

C.  Remove all tape securing the doors to the cool-

er, and any foam blocks between doors.

D.  Remove any components (castors, floor racks, 

etc.) packaged inside the cabinet.

•  Remote cabinets must be ordered as remote.   
 

We do not recommend converting for a standard  

self contained to remote system.

•  All remote cabinets must be hard wired.

•  No castors available.

•  All remote cabinets come standard using 404A  
 refrigerant.

•  All remote units come standard with expansion  
 

valve, liquid line solenoid, heated condensate  

 

pan, and defrost timer when applicable.

•    Contact True Technical Service for BTU         
 requirements.

•  No wiring necessary between cabinet and      
 condensing 

unit.

•  All remote condensing units purchased from   
 

True are 208/230 volts single phase.