Sanyo SR-S155SBP-H Leaflet

Page of 1
to  another,  unplug  the  power  cord, lift  it  by two
When  refrigerator will be  transfer  from one place
cabinet  and  the  mechanical  parts at the  back of 
Do not touch the sides  and back of the refrigerator  
           injury.
freezer  room. The  bottles  will  be broken  or may
Do  not   store  glass   bottles  and  the  like  in  the 
installing the ground.
ask for  the  sanyo  service  centers  advice when
When  there   is   a  malfunction  or  short   circuit,
The  insulation  of  electric  parts  will  be  impaired 
Do    not    splash   water  into the  refrigerator unit. 
Do  not  use  the refrigerator for  storing  drugs  of
chemical  substances. Household refrigerator can
Drug
Gasoline
Alcohol
Gas
not  be  used  for  storing  those  things   because 
100%
Do   not   repair  by  dismantling   the  refrigerator's
parts. It may            sparks or injury.
THE POSITION FOR INSTALLATION
Unstable installation may result  in vibration and  sound;  to  make  the position
the refrigerator. It may cause fire  and  injury.
Do  not  use                     spraying   materials  near
squeezed and the refrigerator may fall down.
of  the  refrigerator.  It   may               their   hands
Do not allow children to hang  on  the  upper  part 
Do not insert our hands into the freezer  room and
touching  the  evaporator. Our hands  will  be  stiff
and sticky and may be injured.
splashing water  into the  installation  of  electrical  
if  it  fall   down  when  opening-closing  door,  the 
Do not put water's stuff above  refrigerator's  door
12 cm
Min 
Min 30 cm
table so that the  air circulation is perfect.
at  least 12 cm and  30 cm  from  the  top
space at the backside  of the  refrigerator
stable, adjust the leg.
When located on the floor made of vinyl, mat, or carpet, place a piece of board
under it. If the bottom of the refrigerator is hot, the board color will change.
Avoid  direct  sunlight ;  hot  equipments  like  stove,  magic  jar,  and   the  like 
they will decrease the cooling power. When those equipments are not situated
far  enough  from  the  refrigerator,  the  cooling   power will weakened and the
Place the refrigerator at a location having
GROUND INSTALLATION
Ground Installation 
Install ground because  when  the  refrigerator is malfunction
or having a short circuit, it will cause electric shock.
Connect ground line to the screw join at
the backside of the refrigerator.
Ground must not be connected to :
Pipe made of plastic.
Gas pipe because It may cause fire or explosion.
Telephone  line or lightning rod.  It  will  be   dangerous  if  there is a thunder.
Install ground when :
The floor is damp.
The refrigerator is next to washing area where water usually flows.
The   refrigerator  is  situated   in  the  basement   where   water leakage and
free space around it.  Allow sufficient free
electricity will be wasted.
evaporation may happen.
they need highly controlled temperature.
NAMES OF REFRIGERATOR'S PARTS
THE COOLING PROCEDURES
Natural cooling method.
This refrigerator uses direct cooling method.
The cool air  from the freezer will flow  naturally  and will cool all  interior  room of
the refrigerator.
The frost accumulated in the refrigerator will weakened the cooling power  of  the
freezer.
    will spill and the ice cubes will reintegrate with the tray and  this  will make
REMOVING THE ICE CUBE FROM THE TRAY
    Put the ice cube tray into the freezer.
of the volume of the tray. (The inside end of the tray). figure 1
    Fill the ice cube tray with clean-boiled water  to  the  maximum  of  80%
MAKING ICE 
first before they are  stored  in the refrigerator.
Hot drinks and foods should be cooled outside
Bottles of drinks should be cleaned first so that
cleanliness  of  the  refrigerator  interior can be
that the cooling circulation is perfect.
To  avoid  rotten  smell,  things  like meat, fish, 
(figure1)
(figure 2)
removed. (figure 2)
    Twist the ice cubes tray  with  two  hands so that  the  ice  can be easily 
    Do  not  remove   the  ice  cubes  from  the         using  water   because  it
MAKING AND REMOVING ICE CUBES 
shrimp,  etc.  should  be  cleaned  beforehand,
wrapped with plastic or put into a box.
and should not be too  close  to each other  so 
The foods stored  should  be  arranged  nicely
maintained.
    it difficult to remove.
water level
CONTENT
USER'S MANUAL AND WARRANTY CERTIFICATE
REFRIGERATOR MODEL :
SR-S155SBP-H
THANK   YOU   FOR   USING    OUR    PRODUCT.
This   manual  describes  in  detail  how  to  use  the
refrigerator specifically designed to meet your needs
and   expectations.  Before   using   the  refrigerator,
read    this   manual   thoroughly    and   completely.
Please  keep  this  manual  properly.
2
7
5
4
8
9
10
11
12
Make sure that the current is 5 Ampere.
a short circuit.
Do  not allow  the  power  cord  being  clipped  by
the  rear  part  of  the   refrigerator.  It may   result
Do   not   use  damaged   or   loose   power   cord.
It  may result sparks  or  a short circuit.
Make  sure  that  the  power cord fits  the  electric
Do  not  allow  the  power cord being  clipped   by
the  legs of  the  refrigerator  or  touching  the  hot
compressor.  It  may result  a short circuit.
Make  sure  that  electric voltage is  in accordance
socket. If not, it may result a short circuit.
Do not use multiple  electric  sockets  when  using
the refrigerator. It may cause fire.
Important Safety Measures
Public Information
At this conditions
Instructions For First Installation
Operating Instructions
Cleaning the Frost
Storing Foods and Drinks
Maintenance 
This  refrigerator  is   produced  in  a  highly  controlled  supervision   using   the   newest
technology.  We prioritize  safety  and  security  in  using   the  refrigerator.  Before using
the refrigerator, read this  user's  manual thoroughly  that  consists  of :  important  safety
measures, instruction for first installation, operating instructions, storing foods and drinks,
cleaning    the   frost,   maintenance, 
 
at   this   conditions,   public    information,  special
information   and  troubleshooting.
by water and will cause short circuit or fire.
CONTROLLING THE TEMPERATURE
cause
cause
flame-able
cause
parts, will cause short circuit or fire.
tray
WARRANTY
REGISTRATION
REFRIGERATOR
Model  SR-S155SBP-H
Serial No.
Date of Purchase
Dealer
Customer's Name and Address
(Name)
(Address)
IMPORTANT
TO VALIDATE YOUR ONE (1) YEAR WARRANTY COMPLETE
AND MAIL THIS CARD WITHIN 10 DAYS
DETACH AND RETAIN THIS PORTION - RETURN ABOVE
1 Year Warranty
Serial No.
REFRIGERATOR
Model  SR-S155SBP-H
Date of Purchase
Customer's Name
Product warranty certificate
This SANYO product quality is guaranteed for one (1)  year  from the  date  of  purchase  against  original  defect
in material or worksmanship under normal use following strictly  the instruction  manual. The compressor  is guaranteed
for (5) years while refrigerant and other consumable items are not covered by this warranty after one (1) years from the
date of original purchase.
Sanyo Service Corporation (SSC) shall perform the services and replacement of parts free of change covered by
this one (1) year warranty to its ulmost effort. There will be corresponding charges for labor, adjustments and parts after
the warranty period.  SSC will not be liable for damages direct or otherwise  arising out of delays on failure in furnishing
part of service  caused by  Acts of God,  Act  of  Government  (national or local), environmental  factors, labor  disputes,
difficulties or failure of transportation, force majeur or other causes  beyond  its control, or  for  damages  resulting  from
delay in performing the services the covered by this warranty.
The  guarantee  shall  be valid upon purchase, mailed and duly register with SSC within ten (10) days.
The warranty shall be void if the units has been tempered with or repaired by other then SSC or its authorized
service shops.
Present this Warranty Card together with your Sales Invoice/Official Receipt upon request for Service.
13
Troubleshooting
Special Information
Grounding Wire
   Attach the  ground wire  (Green / yellow  color  wire located  at  the lower left
   portion at the back of the refrigerator) to  any metal  pipe or to a cover screw
   of the wall receptacle or to a  rod  buried at least  2.4  meters  in  the ground.
Refigerator Unit
the refrigerator  because  their  temperature is high
(this is important for customer information because 
since condenser is located in the refrigerator  sides
that cause it to become hot).
persons   cautiously.  Do  not  lift   it   in   sideways 
Invoice No
OPERATING THE REFRIGERATOR
Note :-To  cool   the   fresh   food  compartment  more,
           please  remove  the tray chiller partition.
           However, if the temperature  is  too cold, kindly
           return it  to  original  location.
Address
Branch
Dealer
Button defrost
Knob thermo
To start defrosting,  push   defrost  button  at   the  center  of  cold  control  knob.  When
defrosting  is  completed,  refrigerator  restarts  cooling operation    automatically.  After
defrosting discard the water in tray chiller. If you  desire to  re-start  refrigeration  before
defrosting is completed, pull out the defrost button.
Push Button Defrosting
1.  Set cold control knob at  "OFF"  position  and  then  plug  AC cord  into  an electrical
     outlet. Motor should not be operate.
2.  Interior lamp should light "ON" when door is opened.
3.  Set  cold  control   knob  at  "MAX"  position  and  let refrigerator  operate  for  about
     30 ~ 45   minutes.  Freezing   compartment   should get  slightly  frosted  and  motor
     should run smoothly except for a soft hum noise.
Before using refrigerator, clean it and  make  test  running All of  the  following instruction
should  make  satisfaction  when  tested in the  following  order.  If not,  check  electricity
supply.When the cause of trouble cannot be located, contact your Sanyo dealer.
Refrigerator temperature can be adjusted by turning cold control
knob. The closer to "MAX" position cold control  is  set by  being
turned  clockwise, the  lower refrigerator  temperature becomes.
Usually setting at " 5 " position, is practical.
Set  cold  control  at  " MAX " position only  when  ice cubes are
needed  in  a   hurry  or   frozen  foods  are   stored   in  freezing
compartment.  In  this  case,  be  sure   to  reset  cold  control at
ordinary setting after ice cubes  have  been  produced or frozen
foods  have  been  removed. Refrigerator  temperature will vary
depending  on   the   quantity   of    the  foods   stored   and  the
frequency with which door is opened.
induction.
Avoid placing the  refrigerator  in  the  damp  area
to   prevent     corrosion    and     electric    current 
position.
Note : This product is intended for household use.
6. Shelf Crisper
1. Top Table
2. Door Evap 
4. Tray Chiller
5. Wire shelf
8. Leg
7. Crisper (for Vegetable) 
3. Tray Ice Cube
8
10
11
9
7
6
5
4
3
2
1
DESCRIPTION
  9. Tray Egg (Rack Upper)
EVAPORATOR (FREEZER ROOM)
Place for frozen foods
Storage for fruits
Storage for cool drinks, fresh foods
REFRIGERATOR ROOM
Storage for fruits
Storage for vegetables
REFRIGERATOR ROOM
DOOR ROOM
Drinks storage
Snacks storage
NAMES OF PLACE AND THEIR FUNCTIONS
10. Rack Middle
11. Rack Bottle
TRAY CHILLER PARTITION
COLD AIR
TRAY CHILLER
Note :
The handle of refirgerator is available as a model
SR-S155SBP-H