Goodmans ASX User Manual

48

The GE X13

TM

 Motor is a one piece, fully encapsulated, 3

phase brushless DC (single phase AC input) motor with ball
bearing construction. Unlike the ECM 2.3/2.5 motors, the
GE X13

TM

 features an integral control module.

Note: The GE TECMate will not currently operate the GE
X13

TM

  motor.

1. Using a voltmeter, check for 230 volts to the motor

connections L and N. If 230 volts is present, proceed to
step 2. If 230 volts is not present, check the line voltage
circuit to the motor.

2. Using a voltmeter, check for 24 volts from terminal C to

either terminal 1, 2, 3, 4, or 5, depending on which tap is
being used, at the motor. If voltage present, proceed to
step 3. If no voltage, check 24 volt circuit to motor.

3. If voltage was present in steps 1 and 2, the motor has

failed and will need to be replaced.

Note: When replacing motor, ensure the belly band is
between the vents on the motor and the wiring has the
proper drip loop to prevent condensate from entering the
motor.

C L G N

1 2 3 4 5

0.1

1,240

1,500

1,800

2,160

0.2

1,170

1,460

1,740

2,080

0.3

1,120

1,360

1,680

1,990

0.4

1,060

1,280

1,610

1,890

0.5

980

1,200

1,520

1,790

0.6

900

1,110

1,430

1,690

0.1

900

1,380

1,540

1,730

0.2

850

1,320

1,490

1,670

0.3

790

1,270

1,450

1,590

0.4

740

1,200

1,400

1,520

0.5

680

1,140

13,560

1,420

0.6

605

1,040

1,280

1,320

0.1

650

1,170

1,130

1,520

0.2

590

1,130

1,100

1,450

0.3

540

1,080

1,070

1,360

0.4

500

1,020

1,030

1,290

0.5

430

950

990

1,200

0.6

330

830

930

1,090

NOTE: External static is for blower @ 230 Volts.  It does not include Coil, Air Filter or Electric Heaters.