Agilent Technologies 8156A User Manual
103
Remote Commands
The Common Commands
*TST?
Syntax
*TST?
Definition
The self-test query commands the instrument
to perform a self-test and place the results of
the test in the output queue.
to perform a self-test and place the results of
the test in the output queue.
Returned value: 0
≤
value
≤
65535. This value
is the sum of the results for the individual tests
Table 8-9
The Self Test Results
So 16 would mean that the DSP (Digital Signal
Processor) Communications had failed, 18
would mean that the DSP Communications had
failed, and so had the Battery RAM. A value of
zero indicates no errors.
Processor) Communications had failed, 18
would mean that the DSP Communications had
failed, and so had the Battery RAM. A value of
zero indicates no errors.
No further commands are allowed while the
test is running.
test is running.
The instrument is returned to the setting that
was active at the time the self-test query was
processed.
was active at the time the self-test query was
processed.
BITS MNEMONICS
BIT
VALUE
8
Counter
256
7
Analog to Digital Converter
128
6
General DSP Hardware
64
5
DSP Timeout
32
4
DSP Communications
16
3
Calibration Data Corrupt
8
2
Keypad
4
1
Battery RAM
2
0
Calibration Data
Not Present/ Checksum Fail
1