Philips WP3821 User Manual

For taps with an aerator (threaded on the outside) (Fig. 11).

 1 

 Remove the attachment nut and the adapter from the water 

purifier (Fig. 7).

  

 Remove the aerator cap from the tap and pass the attachment nut 

over the spout. Take out the original adapter and screw the 

matching adapter (B-type) onto the tap (Fig. 12).

  

 Tighten the adapter further with a coin (Fig. 13).

  

 Firmly screw the attachment nut onto the water purifier 

housing (Fig. 14).
installation C-type adapter

For taps with an aerator (threaded on the inside) (Fig. 15).

 1 

 Remove the attachment nut and the adapter from the water 

purifier housing (Fig. 7).

  

 Remove the aerator cap from the tap. Take out the original adapter 

and screw the matching adapter (C-type) onto the tap through the 

attachment nut. If water leakage occurs, wind Teflon tape round the 

screw thread of the adapter before you screw it onto the 

tap (Fig. 16).

  

 Tighten the adapter further with a coin (Fig. 17).

  

 Firmly screw the attachment nut onto the water purifier 

housing (Fig. 18).
installation d-type adapter

For taps other than A, B or C.  (Fig. 19)

 1 

 Remove the attachment nut and the adapter from the water 

purifier housing (Fig. 7).

  

 Take out the original adapter and screw the D-type adapter onto 

the water purifier housing.  (Fig. 20)

  

 Push the water purifier housing onto the tap from below and 

tighten the 4 screws evenly (Fig. 21).

-

-

-

11