Clarion SIRCR User Manual
SIRCR
11
You may adjust the orientation of the cradle by
loosening the star nut and tightening it when the
cradle is in the desired viewing position.
loosening the star nut and tightening it when the
cradle is in the desired viewing position.
When it’s time to take the Plug and Play receiver
with you, press the release button to remove it from
the cradle and slide the receiver upwards.
with you, press the release button to remove it from
the cradle and slide the receiver upwards.
Plug and Play release button
6. Removing the receiver
Release button
Front of cradle
Your goal is to place the antenna on a relatively flat
surface on the exterior of the vehicle, preferably on
the roof (the high point) or on the trunk, if the car is a
convertible.
surface on the exterior of the vehicle, preferably on
the roof (the high point) or on the trunk, if the car is a
convertible.
Determine the best position
1.
Plug the antenna into the connector on the side
of the cradle.
of the cradle.
Antenna and power connectors
7. Mount the antenna
Antenna
Power
Left side
of cradle
of cradle
Sirius_Shuttle_Vehicle_Installation.book Page 11 Friday, March 12, 2004 4:56 PM