Rolls RM70 Leaflet

Page of 1
The RM70 is a single rack space mixer designed for the install/contractor market. It 
is ideal for small clubs, restaurants, churches, or schools.  The unit mixes three bal-
anced microphones with five stereo sources to mono or stereo balanced Main Out-
puts. 
The XLR Microphone Inputs have Mic/Line level switches, a Mic/Loop Insert jack, 
and individually switchable +12 VDC phantom power. Priority talkover is available 
on one microphone for paging. When this function is engaged, the signal at Mic One 
temporarily mutes the source signals - the other two mic signals are still present.
A Music-On-Hold function has been included for connection to an telephone 
system. The signal present at Source 3 Input will be sent to the Music On Hold screw 
terminal outputs. A Music On Hold level control has been provided to adjust the 
volume of this function.
Each Microphone input has a level and tone control, and Bass and Treble controls 
have been provided for all the sources. A Master Output Level control adjusts the level 
of all mixed signals.
A Remote Volume output jack is provided for connection to a 100K ohm linear 
taper potentiometer and used as an external master level control.
FEATURES:
• Three XLR Microphone Inputs
• Individually switchable phantom power
• Five Stereo Source Inputs, Four RCA and one front panel stereo 3.5mm
• Tone controls for each Mic Input / Bass and Treb
T
T
le controls for the Source Inputs
• Music-On-Hold function with rear-panel Level control
• 1/4" TRS Mic Insert jack
SPECIFICATIONS
Input Impedance:  
 
Mic:  
 
600 Ω XLR balanced
 
 
 
 
Line: 
 
22K Ω
 
 
 
 
Source:   
22K Ω gold plated RCA
 
 
 
 
Mic/Loop:  
22K Ω 1/4" TS unbal.
Max Input Level:   
 
Mic: 
 
-14 dBV Mic level
 
 
 
 
 
 
+20 dB Line levl
 
 
 
 
Source:   
24 dBV
Max Gain: 
 
 
Mic: 
 
60 dB
 
 
 
 
Source:   
26 dB
In/Out Connectors: 
 
3: XLR, 4: Stereo RCA, 3: 1/4", 1: 3.5mm, 
 
 
 
 
1 screw terminal
Phantom Power:   
 
+12 VDC
Output Level: 
 
 
+17 dBV max
Output Impedance: 
 
51 Ω
Phase Shift: 
 
 
<10 degrees, 20Hz to 20 kHz
Tone Controls (Sources):   
+/-12 dB 100 Hz Bass
 
 
 
 
+/-12 dB 11kHz Treble
Tone Controls (Mic): 
 
-3dB; 300 Hz C.W. 4 kHz C.C.W.
Tone Shelving Slope  
 
6 dB / Octave
Max S/N ratio: 
 
 
96 dB
Nose Floor: 
 
 
- 80 dB
THD: 
 
 
 
<.025%
CMRR:   
 
 
>52 dB (Mic)
Size: 
 
 
 
19" x 1.75" x 6"
 
 
 
 
(48.3 x 4.5 x 15 cm)
Weight:   
 
 
5 lbs. (2.3 kg)
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT, 84107
(801) 263-9053  FAX (801) 263-9068
info@rolls.com • www.rolls.com
RM70 Mic/Source Selector
10/31/06