Kenmore 31133 User Manual

12

6.  Mount the 8” round adapter/damper (included in a separate 

box) to the hood using 4 no. 8 x 3/8” sheet metal screws 

(included).

1. Remove protective plastic film covering the lower flue 

only.

  Peel off both corners at the top of the upper fl ue.

  Position the lower fl ue rear notches down (the ones with the 

45° angle).

  Gently slide upper fl ue inside lower fl ue, louvers end fi rst 

(so that louvers are hidden inside lower fl ue, as they are not 

needed).

HO0144

  Both lower and upper fl ues are included with the hood, but 

for a 10 foot ceiling, discard the provided upper fl ue  and 

use the optional extension fl ue, part no. 31131 (purchase 

separately).

NOTE

2. Carefully slide in place decorative fl ue base (notches end 

fi rst) between the shaded part and the exterior wall of the 

top of the hood.

HO0143

HJ0041

7.  Plug hood power cord into the outlet.

  Slide a 8” metal round duct over the adapter/damper. Use 

metal foil duct tape to seal the joint.

HJ0037