Hobart CG41 ML-CG41240S001 User Manual

– 5 –

Table 1 shows key general and dimensional data of all models.  Consult floor plans on pages 8-10 for positioning
and related information.  See pages 11-13 for wiring diagrams.

Hobart CG Series Electric Counter Griddles are heavy duty griddles capable of handling any griddling operation
with ease.  Included are large grease drawers which pull out from the front.

Before installing the griddle, verify that the electrical supply agrees with the specifications on the griddle data
plate which is located on the top right side of the griddle body.

Immediately after unpacking the griddle, check for possible shipping damage.  If the griddle is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.

Place the griddle on its back.  Attach the four 4" legs (eight 4" legs on Model CG59 ) to the body of the griddle
by threading the exposed leg stud into the threaded holes located on the underside of the griddle.  Tighten each
leg so that the top face of the leg is pressed firmly against the body bottom.

Place the griddle in its operating location.  Allow adequate space around the griddle for operation and servicing.

Level the griddle front-to-back and side-to-side.  Hold the leg with one hand to prevent the leg from loosening
from the body and use a wrench to turn the foot to increase or decrease leg height.