Hoshizaki KM-260BAH User Manual

63

1) Remove the water tank (see “19. WATER TANK”). The bin control switch is located 

as shown below when viewed from the front.

Bin Control Switch

2) Remove the top panel and the rear panel.

3) Disconnect the connector of the bin control switch lead (black) covered with a 

silicone hose and remove the lead wire from the grommet.

4) Loosen the thumbscrew on the right side.

5) Remove the thumbscrew on the left side. Shift the bin control switch to the left to 

remove.

6) Refi t the removed parts in the reverse order of the removal procedure.

7) Plug in the icemaker or connect the power source.

Remove Loosen

Shift to the left 
and remove