Hoshizaki KM-260BAH User Manual

Fig. 19

Spray Tube

Front Separator

3) Remove the top cover and front cover. See Fig. 19.

4) Disconnect the silicone hose from the spray tube, and remove the spray tube from

the evaporator bracket.

5) Remove the front separator by pushing the pins inserted into both sides of the

evaporator bracket toward the center. See Fig. 19.

Note: Be careful not to break the pins.

6) The rear separator is hooked on the groove in the evaporator bracket. Remove the

rear separator by lifting it up and down. See Fig. 19.

7) Refi t the separators in the reverse order of the removal procedure. Check that the

separators are fi t correctly and can swing like a pendulum.

8) Plug in the icemaker or connect the power source.

Silicone Hose

Front Cover

Top Cover

Rear Separator