Electrolux FMV156DBE User Manual
5
FMV156DBE
FMV156DSE
FMV156DQE
FMV156DCF
PRODUCT DESCRIPTION
GENERAL INFORMATION
OPERATION
TROUBLESHOOTING GUIDE AND
TEST PROCEDURE
TOUCH CONTROL PANEL
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
WIRING DIAGRAM
PARTS LIST
ELECTROLUX HOME PRODUCTS, INC.
SERVICE MANUAL
ELECTROLUX
OVER THE RANGE
MICROWAVE OVEN
FMV156DBE / FMV156DSE
FMV156DQE / FMV156DCF
FOREWORD
This Manual has been prepared to provide Electrolux Home Prod-
ucts
Service Personnel with Operation and Service Information for the
ELECTROLUX OVER THE RANGE MICROWAVE OVENS, FM-
V56DBE, FMV56DSE, FMV56DQE, FMV56DCF.
ucts
Service Personnel with Operation and Service Information for the
ELECTROLUX OVER THE RANGE MICROWAVE OVENS, FM-
V56DBE, FMV56DSE, FMV56DQE, FMV56DCF.
It is recommended that service personnel carefully study the entire
text of this manual so that they will be qualified to render satisfactory
customer service.
text of this manual so that they will be qualified to render satisfactory
customer service.
Check the interlock switches and the door seal carefully. Special
attention should be given to avoid electrical shock and microwave
radiation hazard.
attention should be given to avoid electrical shock and microwave
radiation hazard.
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained service
personnel.
personnel.
DANGER
Certain initial parts are intentionally not grounded and present
a risk of electrical shock only during servicing. Service
personnel - Do not contact the following parts while the ap-
pliance is energized;
High Voltage Capacitor, Power Transformer, Magnetron, High
Voltage Rectifier Assembly, High Voltage Harness;
If provided, Vent Hood, Fan assembly, Cooling Fan Motor.
a risk of electrical shock only during servicing. Service
personnel - Do not contact the following parts while the ap-
pliance is energized;
High Voltage Capacitor, Power Transformer, Magnetron, High
Voltage Rectifier Assembly, High Voltage Harness;
If provided, Vent Hood, Fan assembly, Cooling Fan Motor.
All the parts marked “ * ” on parts list are used at voltages more
than 250V.
than 250V.
Removal of the outer wrap gives access to voltage above 250V.
All the parts marked “ ∆ ” on parts list may cause undue mi-
crowave exposure, by themselves, or when they are damaged,
crowave exposure, by themselves, or when they are damaged,