Sharp 92LFANT1746A User Manual

04/12/29

CD-ES770(U)2.fm

TINSEA095AWZZ

Preparation for Use

CD-ES770

Remote control

Battery installation

Precautions for battery use:

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to
malfunction.

Battery removal:

Open the battery cover and pull up the battery to take out.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.

Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.

Keep the remote control away from moisture, heat, shock, and
vibrations.

Test of the remote control

Check the remote control after checking all the connections (see
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

Open the battery cover.

Insert the batteries according to the direction indicated in
the battery compartment (back of the battery cover).

When inserting or removing the batteries, push them toward the

battery terminals.

Close the cover.

8" - 20"
(0.2 m - 6 m)

Remote sensor