Sharp AX-1110(SL)M User Manual

11

  Before operating your oven, make sure you read 

and understand this operation manual completely.

  Before the oven can be used, follow these 

procedures:

1. Ensure the drip tray is in the correct position. See 

page 8.

2. See below for getting started.

Your oven has an Energy Save Mode. This facility saves 
electricity when the oven is not in use.

P R O C E D U R E

Open the door. The display will show ".0".
The oven lamp will light while the door is open.

Plug the oven into a power point.
Nothing will appear on the display at this time. 

Close the door.
Now you are ready to use the oven.

CAUTION:
In Energy Save Mode, if you do not operate the oven 
for 3 minutes or more (e.g. after closing the door, or 
pressing  STOP/CLEAR, or at the end of cooking), 
you will not be able to operate the oven until you open 
and close the oven door again.
NOTE:
When you set Child Lock or Demonstration Mode, En-
ergy Save Mode will be cancelled temporary.

1. Press STOP/CLEAR if you make a mistake during 

programming.

2. STOP/CLEAR can be used to stop the oven 

temporarily during cooking.

3. To cancel a programme during cooking, press 

twice.

You may detect smoke or a burning smell when using 
the grill for the fi rst time, this is normal and not a sign 
that the oven is out of order.
To avoid this problem, when first using the oven, 
operate the grill without food for 20 minutes. 
PREPARATION
Ensure the room is well ventilated.

P R O C E D U R E

Ensure that no food is in the oven. 
Enter the time by pressing TIME 
(20.00). 

Press  GRILL and  
START/AUTO  
MINUTE.

WARNING:
The oven door, outer cabinet and oven cavity will become 
hot.

x 2

x 1

x 1

AX-1110(SL)M_eng.indd   11

AX-1110(SL)M_eng.indd   11

8/16/2013   11:03:57 AM

8/16/2013   11:03:57 AM