GE JVM3660WD User Manual
35
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Cooktop Light/Night Light
Replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your
GE supplier.
halogen bulb (WB36X10213), available from your
GE supplier.
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw at the right edge of the light
cover and push on the left edge of the cover
to open.
cover and push on the left edge of the cover
to open.
Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by pulling straight out.
Replace with the same size and type bulb.
before removing. After breaking the adhesive
seal, remove the bulb by pulling straight out.
Replace with the same size and type bulb.
Raise the light shield and replace the screw.
Connect electrical power to the oven.
Connect electrical power to the oven.
4
3
2
1
Replacing the light bulbs.
www.GEAppliances.com
Remove screw