Haier HMC1035SESS User Manual

NOTE: Both of TIME DEFROST and 
AUTO DEFROST can be set as the 
first stage. Convenience Cooking 
pads(i.e.Popcorn) cannot be used for 
multi-stage cooking.

1.  Touch the TIME DEFROST pad, the 

display will show dEF2.

2.  Enter desired defrosting time with 

the number pad.

NOTE: The default power setting for 
defrosting is 30% (PL3), to change the 
power level touch POWER  once to 
display the current power "PL 3", then 
press the number pad of  the power 
level you wanted.
3.  Touch START/+30 Sec to begin 

defrosting.

1.  Touch the AUTO DEFROST pad, the 

display will show dEF1.

2.  Enter weight to be defrosted in 

ounces (oz.) with the number pad, 
from 4 to 100 oz.

3.  Touch START/+30 Sec to begin 

defrosting.

•  After setting AUTO DEFROST, 

the oven can be programmed to 
automatically switch to multiple-stage 
cooking, follow the steps in the  
multi-stage cooking section.

•  During defrosting, you need to turn 

food over for uniform defrosting. After 
turning, touch START/+30 Sec pad to 
resume defrosting.

The safety lock prevents unsupervised 
operation by children. Set the function 
in standby mode.
To set: Press and hold STOP/CLEAR for 
3 seconds. Lock icon is indicated on the 
display and there will be a long beep.
To cancel: Press and hold STOP/CLEAR 
for 3 seconds, there will be a long beep. 
Lock icon disappears from the display.

You can store up to 5 programs into 
memory for future use:

Touch the MEMORY pad, the number 
1 will be displayed*. Set a 1 or 2 step 
cooking procedure as described above. 
Press MEMORY to save the setting. 

To use a stored program, Touch the 
MEMORY pad, the number 1 will be 
displayed. Touch the START/+30 Sec 
pad.

*Touch MEMORY repeatedly to access 
memory locations 2 through 5.

1.  Program the clock if it has not been 

programmed.

2.  Set a 1 or 2 step cooking procedure 

as described above.

3.  Touch the CLOCK pad, the hour figure 

on the clock will flash

4.  Enter the time desired for the 

program to begin (example 3:15 is 
entered as 0315, 11:30 is entered as 
1130)

5.  Set AM or PM with the AM/PM pad
6. Touch the START/+30 Sec pad
7.  The procedure will begin at the set 

time.