Sharp AR-5516N User Manual
103
7
HOW TO MANUALLY RESET THE
NETWORK SETTINGS OF THE
MACHINE
NETWORK SETTINGS OF THE
MACHINE
Turn off the machine's power switch.
Turn on the power while holding down the push switch.
Continue to hold down the push switch until the status LED
lights up.
Turn on the power while holding down the push switch.
Continue to hold down the push switch until the status LED
lights up.
Push switch
Status LED (orange)
• Scanning settings will remain even after the network settings of the machine are reset to the factory default.
• Do not turn off the machine while resetting the network settings to the factory default.
• Do not press the push switch when the machine is turned on again after the network settings are reset to the
• Do not turn off the machine while resetting the network settings to the factory default.
• Do not press the push switch when the machine is turned on again after the network settings are reset to the
factory default.
Caution