Sharp AR-5516N User Manual

Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an 
RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper, 
or one two-sided original onto each side of one sheet of paper. 

→ Paper

→ Two sides

A5 to A3
• The bypass tray cannot be 

used.

→ Two sides

→ One side

→ Two sides

A5, B5, B5R, A4, A4R, B4, A3
• Special paper cannot be 

used.

• The bypass tray can only be 

used when making 
one-sided copies from 
two-sided originals.

• To use paper in the bypass tray, make a two-sided copy as explained in 

.

• When performing automatic two-sided copying of a one-sided original, or one-sided copying of a two-sided 

original, the image on the back can be rotated 180 degrees to reverse the top and bottom (Image rotation in 
duplex copying). To rotate the image 180 degrees, enable the setting as explained in 

 or in the system settings 

, and then follow the steps below. In particular, when 

a one-sided vertical (portrait) original is placed in a horizontal orientation (B4 or A3 size) for two-sided copying, 
the top and bottom of the images on the front and back of the paper will be reversed, and thus this function can 
be conveniently used to make the top and bottom of the images agree.

Orientation of the 
placed original

The top and bottom of 
the images on the front 
and back are reversed.

The top and bottom of the 
images on the front and 
back are the same.