Sharp AR-5516N User Manual
50
SCANNING FROM YOUR
COMPUTER
COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-compliant applications. The
machine also supports WIA (Windows Image Acquisition), making it possible to scan from WIA-compliant
applications and the "Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA settings,
see the help file for the scanner driver or Windows Help.
machine also supports WIA (Windows Image Acquisition), making it possible to scan from WIA-compliant
applications and the "Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA settings,
see the help file for the scanner driver or Windows Help.
SCANNING FROM A TWAIN-COMPLIANT
APPLICATION
APPLICATION
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of
TWAIN-compliant applications.
TWAIN-compliant applications.
1
Place the original(s) that you wish to
scan on the document glass/RSPF.
scan on the document glass/RSPF.
2
After starting TWAIN-compliant
application, click the "File" menu and
select a menu to scan.
application, click the "File" menu and
select a menu to scan.
3
Select "SHARP MFP TWAIN U", and
click the "Select" button.
click the "Select" button.
4
Select the menu to acquire an image
from the application’s "File" menu.
from the application’s "File" menu.
The scanner driver setup screen will appear.
5
In the "Scanning Source" menu,
select the location where you placed
the original in Step 1.
select the location where you placed
the original in Step 1.
• If you placed a one-sided original in the RSPF,
select "SPF (Simplex)".
• If you placed a two-sided original in the RSPF,
select "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)" according to the binding
position of the original.
(Duplex-Tablet)" according to the binding
position of the original.
6
Click the "Preview" button.
The preview image will appear.
The method for accessing the menu to select
the scanner depends upon the application.
For more information, refer to the manual or
the help file of your application.
the scanner depends upon the application.
For more information, refer to the manual or
the help file of your application.
• If you are using Windows XP/Vista, you can
also select "WIA-SHARP AR-XXXX" to
scan using the WIA driver.
scan using the WIA driver.
• Depending on your system, "SHARP MFP
TWAIN U 1.0 (32-32)" and "WIA-SHARP
AR-XXXX 1.0 (32-32)" may appear in the
above "Select Source" screen.
AR-XXXX 1.0 (32-32)" may appear in the
above "Select Source" screen.
Note
Note
If you selected "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)" in the "Scanning Source"
menu, select whether the orientation of the
placed original is "Right edge is fed first" or
"Top edge is fed first".
(Duplex-Tablet)" in the "Scanning Source"
menu, select whether the orientation of the
placed original is "Right edge is fed first" or
"Top edge is fed first".
• If the angle of the image is not correct, reset
the original, and click the "Preview" button
again.
again.
• If the preview image is not oriented
correctly, click the "Rotate" button in the
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
the original.
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
the original.
• If you set multiple pages in the RSPF, the
machine previews only the top page of the
originals, and then sends it to the original
exit area. Return the previewed original to
the RSPF before starting the scanning job.
originals, and then sends it to the original
exit area. Return the previewed original to
the RSPF before starting the scanning job.
Note
Note