Smeg SA9065 User Manual
Instructions for the user
34
12. EXTRAORDINARY MAINTENANCE
Ovens periodically require small maintenance interventions or
replacement of parts subject to wear and tear such as gaskets, electric
bulbs etc. Specific instructions for each intervention of this type appear
below.
replacement of parts subject to wear and tear such as gaskets, electric
bulbs etc. Specific instructions for each intervention of this type appear
below.
Before performing any operations requiring access to powered
parts, switch off the power supply to the machine.
parts, switch off the power supply to the machine.
12.1 Lubrication of gas taps
With time it may happen that the gas taps get blocked and hard to turn.
Clean them inside and re-grease them. This operation must be done
by an authorised person.
Clean them inside and re-grease them. This operation must be done
by an authorised person.
12.2 Replacement of light bulbs
Remove cover A by twisting anticlockwise, replace bulb B with another
similar bulb. Refit the cover A.
similar bulb. Refit the cover A.
Only use oven bulbs (T 300°C).
12.3 Dismantling of the doors
Hold the door on both sides with
both hands near hinges A and
raise levers B. Lift up the door
forming an angle of about 45°
and remove. To refit, slide the
hinges A in the grooves, drop
the door and release levers B.
both hands near hinges A and
raise levers B. Lift up the door
forming an angle of about 45°
and remove. To refit, slide the
hinges A in the grooves, drop
the door and release levers B.