Electrolux 583399 User Manual

Page 6

62.9695.01

Switching on
Switch on the control switch (S) turn from position 0 to I. This 

switches on the temperature pre-setting function. The lamp 

(LS) lights up.
0 = Off
I = On

Set the desired cooking temperature (flashing nominal 

value) with the temperature selection knob (T) on the display 

(AT).
Turn right = increase
Turn left = reduction
Smallest change = 1°F
Programming the cooking time and the starting time (or 

only one function).
Pressing the button (DT) switches on the  programme for the 

cooking time (flashing nominal value). The desired cooking 

time is set with the cooking time knob (D) on the display (AD).
Turn right = increase
Turn left = reduction
Smallest change = 1 minute
The lamp (LD) only lights up when the desired temperature 

has been reached and the cooking time expires. 

temperature is reached. It then stays on permanently.
Observing the flames
The window in the front cladding wall of the pan can be used to 

determine whether the burner has ignited and the flames are 

evenly distributed.

An acoustic signal sounds when cooking is over. This is 

acknowledged by pressing the button (Q).
The power supply is then switched off.
All activated functions are subsequently switched off:
•

Press the pre-set temperature button (TT) for some sec-

onds.

 

Lamp (LT) goes out.

•

Press the cooking time button (DT).

 

Lamp (LD) goes out.

 

 

After cooking has been completed, the control switch (S) is 

switched off.
•

Turn from position I to 0.

0 = Off

•

The lamp (LS) goes out.

•

Switch off the power isolator (H) (only available as an 

option).

 

Turn from position I to 0.

0 = Off

The appliance can be switched off before cooking has been 

completed.
If the function buttons (TT), (DT) and (ZT) are switched on and 

switching off is only done by means of the control switch (S), 

all the functions and previously set data for temperature, cook-

ing time and starting time remain saved and active when the 

switch (S) is turned on again.
IIf the appliance develops a fault, the electrical switch in the 

building must also be switched off and the gas valve must be 

closed.

SOFT
Pressing the Soft button (R) adapts the power supply to the 

food, i.e. reduces it.
The lamp (LR) on the button (R) lights up if the soft setting has 

been switched on.
The following functions are activated by pressing button (Q):
1. All displays

Food temperature (AT)

 Cooking 

time 

(AD)

 

Starting time (AZ)
flash indicating the nominal value that has been pro-

grammed in.

2. Acknowledgement of the acoustic signal when cooking has 

been completed.

3. Acknowledgement of error messages (see section 12, 

Troubleshooting).

TT Button, activation of settings
LT Lamp, cooking temperature
DT Button, cooking time
LD Lamp, cooking time expires
ZT Button, starting time
LZ Lamp, starting time
LR Lamp, soft settings
 Q Button, acoustic signal
 R

Button, soft

LS Lamp, temperature 

 

pre-setting

AT Display, cooking tempera-

ture

 T

Temperature selection knob

AD Display, remaining cooking 

time

 D

Cooking time knob

AZ Display, time
 Z

Starting time knob

LU
LC
 C
 U
 S

Control switch