Miele F 9212 I User Manual
Securing the appliance and
fitting the furniture door
fitting the furniture door
^ Push the appliance against the
housing wall on the side on which the
door opens so that the sealing strip is
pressed into the housing wall
door opens so that the sealing strip is
pressed into the housing wall
h.
^ Secure the appliance at the top with
screw
i (4 x 19 mm) into bracket b,
pushing the appliance against the
furniture wall as you do so, then
secure it at the bottom with screws
furniture wall as you do so, then
secure it at the bottom with screws
j
(4 x 36 mm) through the adjusting
screws in the hinge plates on the
housing.
screws in the hinge plates on the
housing.
^ Tighten all the screws.
^ If necessary, align cover strip k by
^ If necessary, align cover strip k by
pushing it parallel to the top of the
unit - it should not protrude.
unit - it should not protrude.
^ Fold in the side section of bracket b.
^ Replace cover a, and cap all the
holes with stoppers
l and m.
^ Secure door fixings n to the
appliance door with screw
o
(3.9 x 9.5 mm), to suit the position of
the handle.
the handle.
Very large doors will require several
door fixings.
door fixings.
^ Open the door right out, and push
fixing guides
p into door fixings n.
^ Position the furniture door onto the
appliance door, and secure fixing
guides
guides
p to the furniture door using
screws
q (4 x 14 mm). Maintain a
distance d (= the thickness of the
housing unit walls) between the edge
of the appliance door and outer edge
of the furniture door.
housing unit walls) between the edge
of the appliance door and outer edge
of the furniture door.
^ Align the door fixing so that the
furniture door on the side with the
handle does not lie against the
housing unit wall when the door is
shut. A
handle does not lie against the
housing unit wall when the door is
shut. A
minimum distance of 1 mm
must be maintained.
^ Cap the empty holes on the
appliance door with stoppers
r
supplied; this is vital for the long-term
effectiveness of the insulation.
effectiveness of the insulation.
Building in the appliance
37