Sony PCV-R532DS User Manual

The following is a list of status and error messages that may appear on 
your system from time to time. 

Floppy Disk Controller 
Resource Conflict

The diskette controller has requested a 
resource that is already in use.

CMOS Checksum Error,
CMOS Cleared

The CMOS data was reinitialized due to a 
CMOS checksum error. 

CMOS Data Invalid,
CMOS Cleared

Invalid entry in the CMOS.

Parallel Port Resource Conflict

The parallel port has requested a resource 

that is already in use.

PCI Error Log is Full

This message is displayed when more than 
15 PCI conflict errors are detected. No 
additional PCI errors can be logged.

PCI I/O Port Conflict

Two devices requested the same resource, 
resulting in a conflict.

PCI IRQ Conflict

Two devices requested the same resource, 
resulting in a conflict.

PCI Memory Conflict

Two devices requested the same resource, 
resulting in a conflict.

Primary Boot Device Not 
Found

The designated primary boot device (hard 
disk drive, diskette drive, CD-ROM drive, 
or network drive) could not be found.

Primary IDE Controller 
Resource Conflict

The primary IDE controller has requested a 
resource that is already in use.

Primary Input Device Not 
Found

The designated primary input device 
(keyboard, mouse, or other, if input is 
redirected) could not be found.

Primary Output Device Not 
Found

The designated primary output device 
(display, serial port, or other, if input is 
redirected) could not be found.

Secondary IDE Controller 
Resource Conflict

The secondary IDE controller has requested 
a resource that is already in use.

Serial Port 1 Resource Conflict

Serial port 1 has requested a resource that is 

already in use.

Static Device Resource Conflict

A non-Plug and Play ISA card has 
requested a resource that is already in use.