Sony PCV-R532DS User Manual

Page of 114
Removing, Installing, and Replacing Components
31
Replacing the Lithium Battery 
You may need to replace the lithium battery if your computer consistently 
loses the date or time settings after turning it off. The lithium battery has 
a typical life of three years, after which the battery may be too weak to 
power the CMOS memory. 
1
Reboot your computer by selecting Shut Down... from the Start 
menu, and then selecting Restart the computer.
2
If the error message “Error: Check date and time settings”appears 
during the reboot sequence, press F2 during the reboot process to 
access the BIOS Setup Utility. Otherwise it is not necessary to replace 
the battery at this time, and you can skip all remaining steps.
3
Compare all the BIOS options to their default settings (see 
on page 75). Make a list of all the BIOS options that 
are different from their default values. You will refer to this list when 
you restore the BIOS settings later.
4
Select Exit Discarding Changes from the main menu using the right 
arrow key.
5
Press Enter, type Y when prompted to discard changes, then press 
Enter to exit the BIOS Setup Utility.
6
Turn off the computer and unplug the power cord.
7
Remove the cover (see 
!
When you remove the lithium battery, all values stored in the CMOS memory 
(BIOS setup values and Plug and Play values) may be lost. Although the 
computer can hold the charge for a short time while replacing the battery, it 
is safer to assume that the settings will be lost. When the values are lost, the 
BIOS values revert to their factory-default settings (see 
Do not handle damaged or leaking batteries.
The lithium battery may explode if mistreated. Do not disassemble it or 
dispose of it in fire.