Dacor 65537 User Manual

 

 Dishwasher 

IMPORTANT: See the Getting to Know Your Dishwasher section for a 

description of the various wash settings. 

 
 
To wash or rinse the dishes: 

1.  Press one of the wash cycle buttons or the rinse button 

on the control panel: 

2. Press 

START/STOP. The numeric display will show the 

length of the cycle in minutes. 

3.  Close the door. 
4.  Push on the door handle to make sure that the door is completely shut. 

After a brief pause, the dishwasher will start. 

When the wash or rinse cycle is completed, the dishwasher will make 3 short 

beeps. 

You can add a dish, if needed, after starting your dishwasher. Dacor 

recommends that you only add items during the first 5 minutes of operation to 

make sure they get clean. 
To add a dish: 

1.  Open the door. The dishwasher will stop operating. 
2.  Wait a moment for the steam to clear. 
3.  Without touching any of the hot surfaces or racks, insert the item into 

one of the racks, following normal loading instructions. 

4.  Close the door.  
5.  Push on the door handle to make sure that the door is completely shut. 

After a short pause, operation will resume. 

1.  Open the door. The dishwasher will stop operating. 
2. Press 

CANCEL. 

 

 

3.  Close the door. After a short pause, you will hear the water in the 

dishwasher begin to drain. Once the water is drained, the dishwasher 
will stop. 

IMPORTANT: If you press the CANCEL button twice, the dishwasher will 

stop completely. The water inside the dishwasher will not drain.