Dacor 65537 User Manual

 

Use and Care Manual 

Your dishwasher remembers the settings for the last cycle it ran.  
If you want your dishwasher to run the same cycle as it ran the 

1. Press 

the 

START/STOP button once.  

The START/STOP button light will flash and the lights on the 

buttons for last cycle and options run will be lit. 

2. Press 

the 

START/STOP button again to run the 

previous cycle (or you may select a different cycle, then 

press START/STOP if you don’t want to run the 

previous cycle). 

3.  Close the door. After a short pause, the dishwasher will begin to operate.  

If the delay feature was used during the previous cycle, your dishwasher will 
start after the number of hours originally selected. 

1. Press 

NORMAL. 

 

2. Press 

START/STOP. 

 

3. Press 

CANCEL. 

4.  Close the door. After a short pause, you will hear the 

water in the dishwasher begin to drain. Once the water is drained, the 
dishwasher will stop. 

IMPORTANT: Your dishwasher also drains the water at the bottom at the 

start of each wash and rinse cycle. 

1.  Press and hold the SECURE button down for 3 

seconds. All control panel lights are deactivated and 

none of the buttons operate.  

2.  To turn off the secure feature, press and hold the SECURE button down 

for 3 seconds. 

The control panel beeps when you turn this feature on and off.