Sennheiser 830S User Manual
6
Putting the Set 830 S into operation
Putting the Set 830 S into operation
Setting up the transmitter
왘
Place the transmitter so that:
– there are no obstacles in the light path between trans-
mitter and receiver and
– transmitter and receiver are not exposed to direct sun-
light. Direct sunlight may interfere with the reception
and may damage the transmitter.
and may damage the transmitter.
If you are using a
plasma TV screen
:
Plasma TV screens radiate an infra-red signal that can
adversely affect the transmission quality.
adversely affect the transmission quality.
왘
Make sure that the transmitter is placed as far as pos-
sible from your plasma TV screen.
sible from your plasma TV screen.
왘
If necessary, use a standard extension cable (3.5 mm
stereo jack plug) to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser dealer.
stereo jack plug) to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser dealer.
Note:
One transmitter can be used to transmit to several
receivers on the same frequency.
receivers on the same frequency.