Husqvarna FS 6500 User Manual

 

9

BEFORE YOU BEGIN: Read and understand all warnings and instructions before operating the 
Machine described in this manual.  WARNINGS AND CAUTIONS IN THIS MANUAL MUST BE 
UNDERSTOOD AND FOLLOWED! FAILURE TO OBEY WARNINGS MAY RESULT IN 
SERIOUS INJURY OR DEATH.  IT IS YOUR RESPONSIBILITY to make sure persons who use 
this machine have read this manual. 

 

 

operate this machine unless you have read and understood this operator’s manual. 

 

operate this machine without all guards in place. 

 

leave this machine unattended while the engine or motor is running. 

 

work on this machine while the engine or motor is running. 

 

operate this machine when you are tired or fatigued. 

 

operate the machine if you are uncertain of how to run the machine. 

 

use damaged equipment or tool. 

 

touch or try to stop a moving tool with your hand. 

 

transport a machine with the tools mounted on the machine. 

 

use a tool that has been dropped or damaged 

 

touch the tools immediately after use.  These tools require several minutes to cool after operation. 

 

use damaged or worn accessory disk. 

 

allow other persons to be near the machine when starting, refueling, or when  the machine is in operation. 

 

operate this machine in an enclosed area unless it is properly vented. 

 

operate this machine in the vicinity of anything that is flammable.  Sparks could cause a fire or an explosion. 

 

operate this machine while under the influence of drugs or alcohol. 

 

operate this machine with any of the guards removed. 

 

operate this machine unless you are specifically trained to do so. 

 

start operation of the machine until you have a clear work area and secure footing. 

 

use flammable substances, unsecured loads or people as extra weight.  Injury to the operator or other persons 
could result! 

 

use flammable, or improper substances to improve the material removal from the work area. 

 

operate the machine if unknown substances are on or near the work area.   

 

operate the machine before you determine the nature and volatility of any material that will come in contact with 
the grinding tools used by this machine. 

 

 

 

 

 

 

 

 

 

 
 

 

This machine was designed for certain applications only.  DO NOT modify this machine or use for any 
application other than for which is it was designed. If you have any questions relative to its application, DO 
NOT use the machine until you have written HUSQVARNA CONSTRUCTION PRODUCTS and we have 
advised you.